NAKANISHI is antistatic main shaft, be machined for chip only and research and development

With what main shaft is chip treatment good? NAKANISHI is antistatic main shaft, be machined for chip only and with what main shaft is treatment of chip of research and development good? This NAKANISHI is antistatic ESD report main shaft, be chip cut bore only and research and development, rotate speed is as high as 60 thousand to turn, jumpy precision 1μm, have antistatic function, through main shaft in-house carbon brush gives static conductance, avoid to machining the attaint of component of the electron in the process, reduce discard as useless rate. What is ESD antistatic main shaft? ESD represents electrostatic discharge. When PCB of cutting tool cut, meeting generation is electrostatic, the electronic component of meeting attaint PCB. Bring about electronic component to damage to avoid electrostatic discharge, need prevents cutting tool to charge. NR33-6000ATC-ESD of main shaft of Nakanishi new fund, through with carbon brush of axial core connective electrostatic change case from cutting tool, eliminate thereby electrostatic. NAKANISHI is antistatic NAKANISHI of principle of main shaft job is antistatic there is a component to have transmission effect inside main shaft structure, give static conductance, can see, electrostatic it is to pass cutting tool, in transmit with carbon brush of connective of main shaft axes, change case by carbon brush again, rise to remove electrostatic effect thereby. NAKANISHI is antistatic the advantage of main shaft (1) machine through electric main shaft, release electrostatic, prevent electronic component damage; (2) cutting tool of installation of main shaft front is apart from deeper φ10*15L, when machining cutting tool PCB, can keep away from the electronic component with higher interference; (3) change photograph of NR50-5100ATC of knife main shaft automatically to compare with Nakanishi, cutting tool clip holds force to increase 1 times. (4) top rotate speed 60000 turn / Min, jump turn precision 1μm. (5) use pneumatic collet to leave / involve kind, implementation is fast and simple change a knife automatically. CNC Milling